7 years Store on Aliexpress . For new energy products , we are more professional . |
|
--DC 22V-65V or 45V-90V (Optional)
--AC 110V 120V 220V 230V 240V (auto selected )
--Internal Power Limiter built-in
--with Battery Discharge Function / Voltage Adjustable
-- Wi-Fi port (optional )
--Limiter sensor and clamp included (2mters cable )
SGPV - small solar grid tie inverter and solar panels . The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable.
When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first .
The power meter will SLOW down. Electricity costs REDUCED.
*** If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid.
*** Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid.
* Now ,we have the limiter type inverter , if you do not want to sell electric power.
1. the 2nd Generation grid tie inverter, new technical , Higher efficiency .
2. Higher MPPT efficiency , Max 99%
3. Multiple intelligent protection to ensure safe use.
4. Wide DC input voltage , suitable for all types solar panels .
5. Easy to install and easy to operate.
6. UL1741, IEEE1547, VDE4105 standards .
7. Two years Warranty , life time technical support .
8. Power Limiter function , Battery discharge function support .
9. Pure sine wave form output , THD < 5% .
10. Power Limiter function with sensor/clamp
Model : | SUN-1000G2TIL-LCD |
Continuous Power Output | 980W |
Peak Power Output | 1000W |
Input DC Voltage Range | 22V-65V/45V ~ 90V |
Peak power tracking voltage | 25V-60V/50V-90V |
AC Output Voltage Range | 90V-140V/ 190VAC ~ 260VAC |
Output Frequency | 46Hz~65Hz |
Standby Power Consumption | <0.5W |
Total Harmonic Distortion | <5% |
Peak Inverter Efficiency | 92% |
MPPT Efficiency | 99% |
Power Factor | 0.99 |
Output Wave Form | Pure Sine Wave |
MPPT Function | Yes |
Over Current Protection | Yes |
Over Temperature Protection | Yes |
Reverse Polarity Protection | Yes |
Anti-Island Protection | Yes |
Stackable | Yes |
Limiter Function | Yes Limiter sensor/clamp included. |
Weight ( Kg) | 3.6kg |
Dimensions (W x H x D) | 322x196x88 mm |
1. About input voltage :
The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V .
Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel ).
the 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V.
Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel . for example : 2 pcs 200-260w (Vmp 31v ) connected in series , 2 groups in parallel . Save 2 connectors .
1. Solar Grid Inverter with Limiter(built-in)-----1unit
2. AC cable-------------1 pcs
3. Internal type Limiter clamp with sensor & 2m cable----1pcs
4. Warranty card----1pcs
5. User Manual ----1pcs
1 unit inverter installation / more units inverters in parallel . the inverter AC output can be connected in the AC plug of grid in the house .
How to use the Power Limit function ?
Clamp Sensor
Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire.
This installation is not require an additional limiter module,Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.
Bat or solar limited current mode:
This function is usable while using with battery. the setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step.
Reboot voltage:
This setting voltage means while battery charged back, the inverter will auto restart after voltage reached the setting point.It convenient the user and make the function very flexible. Set is 0.1V/Step.
Limit Model :
External limiter and Internal limiter are settable,
Limit mode+External limiter both selected means work under external limiter mode. (external limter needed )
Limit mode+Internal limiter both selected means work under external limiter mode.
Battery and solar limited power mode:
At this working mode,cut off voltage setting is same as battery or solar limited currentmodel , and the power setting is the maximum output power of the inverter. By this setting,user can limit the output power manually.
After installing and set the limit function correctly, the inverter will work automatically.
Certification : CE Rohs EN50438
5 Stars Feedback :
Return & Refund:
30Days Return & Refund .
Unhappy with the Product --- Return ; Unhappy with the Service --- Return ; Unhappy with the Seller --- Return ; No Reason --- Return .
Warranty :
2 years Warranty for replacement or repair , life time parts support and technical support .
1. GAIA NEW ENERGY is your trusted partner for long term business.We are the manufacturer of the solar inverter. We are responsible for the quality of the inverter. The inverter has 2 years guarantee. We provide technical support and service for the inverter the whole life. All inverters would be double tested before shipment to be guaranteed in brand new condition and work perfectly.
2. Returns for exchange are permitted and must be initiated by the buyer within 30 days of receipt. All return items must be in their original condition. Return shipping and handling charge will be at the buyer\'s expense first. Please do contact with us for return address, details and any other issues.
3. We will not be responsible for any delay during delivery including but not limited to the customs package checking, strike, etc.
4. There might be customs duty in Buyers country .Learning about the duty policy , please contact seller before shipping ..
5. In case there is problem with your order, make sure CONTACT US before leaving negative feedback.
6. Please leave us message if you have any question, we will reply in 24 hours, thank you!